Skip to content Skip to footer

How To Make A Ring Smaller

How to make a ring smaller

Rings hold a significant value in our lives, be it as a gift from a loved one or a family heirloom. But sometimes, you might end up with a ring that’s too big for your finger. A loose-fitting ring not only looks unattractive but also poses a risk of falling off and getting lost. Don’t worry, as there are several ways to make a ring smaller. In this article, we will take you through some of the most effective methods to resize your ring.

At Co-creatives, we provide rings for any special occasion and fit them to the size of your finger. 

LOOK AT OUR SIZING CHART HERE???

Here are a few ways to make a ring smaller:

Use a ring guard: Ring guards are small, adjustable plastic or metal strips that attach to the inside of a ring to make it fit more snugly on your finger. They can be found at most jewellery stores and are easy to use.

Apply clear nail polish: If you don’t have a ring guard, you can try applying clear nail polish to the inside of the ring. This will create a barrier between your skin and the metal of the ring, making it fit more tightly. Keep in mind that this is not a permanent solution and the nail polish will eventually wear off.

Get the ring resized: If you want a more permanent solution, you can take the ring to a jeweller to have it resized. They can either add or remove metal from the band to make it fit better. However, this option can be more expensive and may take more time.

Overall, the best option for you will depend on your personal preferences and the type of ring you have.

 How Do You Know If Your Ring Is Too Big?

Here are a few signs to look out for if the ring is too big:

  • It spins around your finger: If your ring is loose enough to spin around your finger, it is likely too big. A properly fitting ring should stay in place on your finger without rotating.
  • It falls off easily: If your ring falls off your finger when you move your hand, it is too big. A well-fitting ring should stay securely on your finger.
  • It feels uncomfortable: If your ring feels loose and shifts around on your finger, it can be uncomfortable to wear. A properly fitting ring should feel snug but not tight, and should not cause any discomfort.
  • You have to constantly adjust it: If you find yourself constantly adjusting your ring to keep it in place, it may be too big. A well-fitting ring should stay in place without needing constant adjustment.

If you experience any of these signs, you may want to consider resizing your ring or using a ring guard to make it fit better. It’s important to have a properly fitting ring to ensure your comfort and prevent the risk of losing it.

What To Do If A Ring Is Slightly Too Big?

If your ring is slightly too big, there are a few options to consider:

  • Use a ring sizer: A ring sizer is a small, flexible band that can be placed around the inside of your ring to make it fit more snugly on your finger. You can find ring sizers at most jewellery stores or online. This is a quick and easy solution that won’t damage your ring.
  • Apply a temporary solution: You can use a temporary solution, such as clear nail polish, to make your ring fit more snugly. Simply apply a small amount of clear nail polish to the inside of the ring and allow it to dry. This will create a barrier between your skin and the ring, making it fit tighter.
  • Consider a ring guard: A ring guard is a small, adjustable strip that attaches to the inside of your ring to make it fit more snugly on your finger. They can be found at most jewellery stores and are easy to use.
  • Have the ring resized: If you want a more permanent solution, you can take your ring to a jeweller to have it resized. They can add or remove metal from the band to make it fit better. However, this option can be more expensive and may take more time.

Overall, the best option for you will depend on your personal preferences and the type of ring you have. If the ring is only slightly too big, a temporary solution or a ring sizer may be the best option.

How Much Does It Cost to Get Your Ring Resized?

The cost of getting your ring resized can vary depending on several factors. These factors include the type of metal, the degree of resizing required, and the jeweller you choose.

In general, the cost of resizing a ring in the UK can range from £20 to £100 or more. However, the price can go higher if the ring is made of more expensive metal, such as platinum or gold. The amount of resizing needed can also affect the price, with more extensive resizing typically costing more. In addition to the degree of resizing required, the jeweller you choose can also impact the cost. Some jewellers may charge more for their services, while others may offer resizing as part of their standard jewellery repair services.

It’s important to note that the cost of resizing your ring may also depend on your location. In some areas, prices may be higher due to local demand or a higher cost of living. When considering the cost of resizing your ring, it’s important to weigh the cost against the value of the ring. If the ring is valuable to you and you plan on wearing it for a long time, the cost of resizing may be worth it to ensure that the ring fits properly and is comfortable to wear.

Overall, the cost of resizing a ring can vary, and it’s important to do your research and find a reputable jeweller who can provide an accurate estimate based on your specific needs.

When Not to Resize Your Ring

While resizing a ring can be a great solution to make it fit comfortably and securely on your finger, there are some situations where it may not be the best option. Here are some instances when you may want to avoid resizing your ring:

The ring is a family heirloom: If the ring has sentimental or historical value, you may not want to resize it. Altering the ring could impact its value or sentimental significance.

The ring has intricate details: If the ring has intricate details, such as filigree or stones, resizing it may be difficult or impossible without damaging the design. In this case, a ring guard or temporary solution may be a better option.

The ring is made of a fragile material: If the ring is made of a fragile material, such as ceramic or glass, resizing it could cause it to crack or break. In this case, it may be best to use a temporary solution or not resize the ring at all.

The cost of resizing is too high: If the cost of resizing the ring is too high, it may not be worth it. You may want to consider a temporary solution, such as a ring sizer or adhesive strips until you can afford to have the ring resized properly.

The ring is too small: If the ring is too small, resizing it may not be possible without adding extra metal or compromising the design. In this case, a temporary solution or finding a new ring may be the best option.

Overall, before resizing your ring, it’s important to consider the material, design, and sentimental value of the ring. You may also want to consult with a jeweller to determine the best course of action for your specific situation.

Jeweller-Applied Ring Sizers 

Jeweller-applied ring sizers are a popular and effective solution for making a ring fit more comfortably on your finger without the need for resizing. These sizes are typically small metal or plastic strips that are attached to the inside of the ring by a jeweller. They work by filling the gap between your finger and the ring, making the ring fit more snugly.

One advantage of jeweller-applied ring sizers is that they are a non-permanent solution. If you decide later that you want to resize the ring, the sizer can be removed by a jeweller without causing any damage to the ring. Additionally, since the sizer is attached by a jeweller, you can be sure that it is applied correctly and won’t fall out or shift around. Jeweller-applied ring sizers come in various sizes and materials to accommodate different ring sizes and preferences. They can be made from plastic, silicone, or metal, and can be adjusted or replaced as needed.

While jeweller-applied ring sizers are a great option for making a ring fit more comfortably, they do have some limitations. They may not be suitable for rings with very thin bands or delicate designs, as the sizer could impact the aesthetics or stability of the ring. Additionally, if the ring is significantly too big, a sizer may not provide enough adjustment to make it fit properly.

Overall, if you’re looking for a non-permanent solution to make your ring fit more comfortably, jeweller-applied ring sizers are a great option to consider. Just be sure to choose a reputable jeweller who can apply the sizer correctly and help you choose the right size and material for your needs.

Sizing Beads

Sizing beads are small metal balls that are attached to the inside of a ring band to help make the ring fit more comfortably and securely on your finger. They are typically made from the same metal as the ring, such as gold or silver, and are attached to the inside of the band by a jeweller.

Sizing beads work by filling the gap between your finger and the ring band, effectively making the ring fit more snugly. They are especially useful for rings that are slightly too big or have a tendency to spin on your finger.

One advantage of sizing beads is that they are a more discreet solution than some other options, such as ring guards or adjusters. Since they are attached to the inside of the ring, they are not visible from the outside, which can help maintain the appearance of the ring.

Another advantage of sizing beads is that they are a permanent solution. Once they are attached to the inside of the ring, they will remain in place until they are removed by a jeweller. This can be a good option for rings that you wear frequently and want to have a consistent fit.

However, sizing beads do have some limitations. They may not be suitable for rings with thin bands or delicate designs, as the beads could impact the aesthetics or stability of the ring. Additionally, if the ring is significantly too big, sizing beads may not provide enough adjustment to make it fit properly.

Overall, if you’re looking for a discreet and permanent solution to make your ring fit more comfortably, sizing beads are a great option to consider. Just be sure to choose a reputable jeweller who can apply the beads correctly and help you choose the right size and material for your needs.

Spring Insert

A spring insert, also known as a ring adjuster or ring snuggie, is a small plastic or metal coil that is inserted into the inside of a ring band to help make the ring fit more snugly on your finger. The coil is typically made of a flexible material that can be compressed and expanded to adjust the size of the ring band.

Spring inserts are a popular solution for rings that are slightly too big, as they can provide a more secure and comfortable fit. They are easy to use and can be inserted and removed by the wearer without the need for a jeweller.

One advantage of spring inserts is that they are a non-permanent solution. If you decide later that you want to resize the ring or use a different solution, the spring insert can be easily removed and discarded.

Another advantage of spring inserts is that they are a very affordable option. They are widely available online and in jewellery stores, and typically cost just a few dollars for a pack of several inserts.

However, spring inserts do have some limitations. They may not be suitable for rings with thin bands or delicate designs, as the insert could impact the aesthetics or stability of the ring. Additionally, some people find that the insert can be uncomfortable or irritating to wear for extended periods.

Overall, if you’re looking for a simple, affordable solution to make your ring fit more comfortably, a spring insert is a great option to consider. Just be sure to choose the right size and material for your ring and finger, and be aware of the potential limitations and discomfort associated with this solution.

Fold-Over Device/Sizing Bar

A fold-over device, also known as a sizing bar, is a small metal strip that is inserted into the inside of a ring band to help make the ring fit more snugly on your finger. The strip is typically made of a flexible material that can be bent and adjusted to fit the shape of the ring band.

Fold-over devices are a popular solution for rings that are slightly too big or have a tendency to spin on your finger. They are easy to use and can be inserted and removed by a jeweller. One advantage of fold-over devices is that they provide a secure and permanent solution for making a ring fit more comfortably. Once the sizing bar is inserted into the ring band, it will remain in place until it is removed by a jeweller. Another advantage of fold-over devices is that they are a discreet solution. Since they are inserted into the inside of the ring band, they are not visible from the outside, which can help maintain the appearance of the ring.

However, fold-over devices do have some limitations. They may not be suitable for rings with thin bands or delicate designs, as the device could impact the aesthetics or stability of the ring. Additionally, since they are a permanent solution, they may not be the best option if you anticipate changes in your finger size over time.

Do-It-Yourself Ring Sizers 

If you would rather try making ring sizers at home you sure can! These methods can be a quick and easy way to make your ring fit more comfortably without the need for a jeweller. 

Here are a few DIY ring sizing methods to consider:

Tape method: One of the simplest DIY methods to size a ring is to use tape. You can wrap a small piece of tape around the inside of the ring band to make it fit more snugly. However, this method is not a permanent solution and the tape may need to be replaced over time.

String method: Another DIY method is to use a piece of string to measure the circumference of your finger, and then use the string to determine the ring size. This method can be less accurate than other methods, but it can be a good starting point if you don’t know your ring size.

Bead method: You can also use small plastic or metal beads to make a temporary sizing device for your ring. Simply string the beads onto a piece of elastic cord and tie the cord to fit snugly around the inside of the ring band.

Paperclip method: A paperclip can also be used to make a DIY ring sizer. Straighten out a paperclip and shape it into a loop that fits snugly around the inside of the ring band.

While these DIY ring sizing methods can be effective in a pinch, they may not provide a permanent solution and may not be as accurate as having a professional jeweller resize your ring. If you need a more secure and long-term solution, it is best to consult a jeweller to discuss your options.

Plastic Guard

A plastic guard is a small plastic tube that is inserted into the inside of a ring band to make it fit more snugly on your finger. These guards are a popular solution for rings that are slightly too big or have a tendency to spin on your finger. They are easy to use and can be inserted and removed without the need for a jeweller.

One advantage of plastic guards is that they are a temporary solution and can be easily removed if you need to resize the ring in the future. They are also a cost-effective option, making them a popular choice for those on a budget.

However, plastic guards do have some limitations. They may not be suitable for rings with delicate designs, as the guard could impact the aesthetics or stability of the ring. Additionally, they may not provide a permanent solution, as the guard could become loose over time and need to be replaced.

Ring Sizers to Avoid

While there are many effective ring sizing methods available, there are also some methods that should be avoided. For example, using a piece of string or paper to measure your finger may not provide an accurate measurement and could lead to an ill-fitting ring. Similarly, using materials like tape, glue, or other adhesives to resize a ring can damage the ring and may not provide a secure or permanent solution. It is generally best to avoid DIY methods that could cause damage to your ring.

Ring Care Advice

Regardless of whether you choose to resize your ring or use a sizing device, it is important to care for your ring properly to ensure it stays in good condition.

Some tips for ring care include:

  • Remove your ring when doing activities that could damage it, such as exercising or doing housework.
  • Avoid exposing your ring to harsh chemicals or abrasive materials, such as cleaning products or sandpaper.
  • Clean your ring regularly using a soft cloth and mild soap and water.
  • Store your ring in a cool, dry place when not in use to prevent damage or tarnishing

Does Ring Resizing Make the Ring Weak?

Resizing a ring typically involves cutting the ring band and adding or removing metal to adjust the size. While this process can weaken the metal in the ring band, it is generally not enough to significantly impact the strength or durability of the ring. However, it is important to note that some types of rings may be more susceptible to damage during the resizing process. For example, rings with delicate designs or gemstones may require special care during the resizing process to prevent damage. To minimise the risk of damage, it is best to consult with a professional jeweller who has experience resizing rings. They can help you choose the best method for resizing your ring and ensure that the process is carried out safely and effectively.